Fix Driver Power State

Ways To Fix Driver Power State

If you want to fix the driver power state then here are some ways.

Blue screens can occur for a variety of reasons. If you receive the Driver Power State Failure error on your Windows 10 device, it could mean that you have defective drivers, incompatible hardware, or, in certain situations, incorrect power settings.

Fortunately, resolving this issue is straightforward. You can try one of the six methods listed below to fix the problem. Simply work your way down the list until you find one that suits your needs.

Fix Driver Power State

External hardware removal: 

External gear attached to your PC can cause computer issues like this if it isn’t working properly. Disconnect your accessories (your speaker, printer, scanner, USB drive, etc.) and restart your computer to determine whether that’s the problem.

If your computer starts up normally after you remove external hardware, it’s likely that one of your components is the source of the problem. Each device should be reinstalled into your PC and tested each time. Then you’ll track down the precise gadget that’s causing your issue. Once you’ve identified the device, reinstall/update the driver for it.

Also check: Ways To Speed Up Microsoft Edge

Problematic driver uninstallation:

In Device Manager, Windows will display the device’s status. A yellow exclamation point will appear on top of the device symbol if it isn’t working properly, such as if the device driver is missing or corrupted. Uninstalling the driver should solve your problem in this scenario. 

Follow the steps below to get started:

  1. If your computer won’t start normally, start it in Safe Mode.
  2. To open the Run box, hit the Windows logo key and R at the same time on your keyboard.
  3. Click OK after typing devmgmt.msc.
  4. Expand the category and look for the yellow exclamation mark device. If you don’t notice any yellow exclamation marks in Device Manager, click ahead to Solution 4 instead.
  5. Select Uninstall device from the device’s right-click menu.
  6. Restart your computer and see whether the Driver Power State Failure error has gone away.

Device drivers updating:

Outdated drivers are one of the most common causes of this issue. It’s critical to have the newest right device drivers for your operating system at all times, whether you update them manually, through Windows Update, or through a trustworthy third-party solution.

We recommend Driver Easy if you’re not comfortable messing around with device drivers. Driver Easy will automatically detect your system and locate the appropriate drivers. You don’t need to know what operating system your machine is running, you don’t need to be concerned about downloading the wrong driver, and you don’t need to be concerned about making a mistake during installation.

  1. Start your computer in Safe Mode.
  2. Get Driver Easy and install it.
  3. Launch Driver Easy and select Scan Now from the menu. After that, Driver Easy will check your computer for any problematic drivers.
  4. Click the Update button next to the driver you require to have the correct version of the driver automatically downloaded and installed one by one (you can do this with the FREE version).
  5. Restart your computer and see whether the Driver Power State Failure error has gone away.

If the issue still remains, move on to the next option.

Power saving turning off:

Issues with power settings may be the source of the problem. So, try changing the power settings to see if it helps.

Follow the steps below to get started:

  1. If your computer won’t start normally, start it in Safe Mode.
  2. To open the Run box, press Win+R (Windows logo key and R key) on your keyboard at the same time.
  3. To open the Control Panel window, type the control panel and click OK.
  4. Select Power Options and View by Small Icons.
  5. Select Balanced (recommended) and then click Change plan options next to it.
  6. Select Change advanced power settings from the drop-down menu.
  7. Go to Wireless Adapter Settings, then to Power Saving Mode, then to Maximum Performance.
  8. Expand PCI Express and Link State Power Management, then select Maximum power savings from the drop-down menu.
  9. Click OK, then Apply.
  10. Check to see whether the Driver Power State Failure error has been resolved by restarting your computer.

Leave a Reply Cancel reply